TESTED AND LISTED FOR U.L. 10C AND CRITERIA OF UBC 7-2 POSITIVE PRESSURE
A

Low Profile Beveled VISION LITE with continuous glass retainer
Recommended for applications where low profile, total visibility and light transmissions are required.

Specifications & Standard Features:

Material: 20 gauge CRS frame.

Construction: Radius Corners, mitered and welded. Beveled return, continuous glass retainer, countersunk mounting holes in bevel return. Screws fasten from room side into prepunched internal mounting holes. This mounting method leaves the corridor side of frame free of fasteners for aesthetic and security purposes.

Finish: Mineral bronze baked on powder coat.

Door: For 1-3/4" door. For other glass and door thickness see SLIMLINE-IG.

Fasteners: #8 x 7/8" flathead phillips head SMS.

Glass: Use 3/16", 1/4", 5/16" fire rated glazing with Warnock Hersey(ITS) or U.L. classification markings for fire rated applications.


Options:

Material: • 22 gauge #304 stainless
steel - #4 finish.
• electro-galvanized steel.

Finish: • Baked on powder coat gray prime
for field painting, no extra charge.
• Special order colors. Please
provide color chip.

Glass: • See Glass Section.

Fasteners: • Security fasteners, please specify

.

Model SLIMLINE-IG Low Profile Beveled VISION LITE

Recommended for applications requiring fire rated, safety and/or insulated glass up to 1" thick.

Specifications & Standard Features :

Material : 20 gauge CRS frame

Construction : Radius Corners, mitered and welded. Beveled return, continuous glass retainer, countersunk mounting holes. Screws fasten from room side into prepunched mounting holes. This mounting method leaves corridor side of frame free of fasteners for aesthetic and security purposes.

Door:   1-3/4". For other door thickness see VLF-EZIG

Finish: Mineral bronze baked on powder coat.

Fasteners : #8 x 7/8" flathead phillips head screws

Glass : 1/2", 5/8", 3/4", 1". Please specify glass thickness when ordering.

For other glass thickness, see VLF-EZIG and VLF-IG

Model SLIMLINE-G, VLF-G, VLF-EZ-G
A
Square or Beveled VISION LITE with Mullions

Recommended for use in applications requiring the "French Door" look. Order basic model prefix and add "G" suffix and number of lites required.

Specifications & Standard Features:

Material: 18 gauge CRS for VLF, 20 gauge for VLF-EZ, and Slimeline..

Construction: Mullions are welded at the heads, sill and jambs, and butt to the glass. Only one glass lite required.

Mullions: 1" x 3/4 '

Door: 1-3/4" door.

Glass: Use fire rated Glazing with U.L. or ITS classification
marking for fire rated applications.

Options:

Mullions: • 1/2" x 1/2", 1/2 x 3/4". other sizes available, consult factory


Other: • Other options, see appropriate data sheet.



TESTED AND LISTED FOR U.L. 10C AND
CRITERIA OF UBC 7-2 POSITIVE PRESSURE